ARCOM

Search or browse again.

Click on the titles below to expand the information about each abstract.
Viewing 15 results ...

Agyekum, K, Ghansah, F A, Tetteh, P A and Amudjie, J (2021) The role of project managers (PMs) in construction health and safety implementation in Ghana. Journal of Engineering, Design and Technology, 19(1), 245-62.

Falaq Assad, N, Edwards, D J, Shelbourn, M, Martek, I, Wellington Didibhuku Didibhuku, T and El-Gohary, H (2021) Comparison of modular and traditional UK housing construction: a bibliometric analysis. Journal of Engineering, Design and Technology, 19(1), 164-86.

Hosseini, M R, Edwards, D J, Singh, T, Martek, I and Amos, D (2021) Engineering project networks: providing “sustainable work systems" for construction knowledge workers. Journal of Engineering, Design and Technology, 19(1), 21-40.

Irewolede Aina, I, Godwin Iroroakpo, I and Michael Gbolagade, O (2021) Key training practice indicators for optimal site supervisors' utilisation in construction firms. Journal of Engineering, Design and Technology, 19(1), 149-63.

Jafari, K G, Nozhat Sadat Ghazi, S and Noorzai, E (2021) BIM-based integrated solution for analysis and management of mismatches during construction. Journal of Engineering, Design and Technology, 19(1), 81-102.

• Type: Journal Article
• Keywords: liability; programming; reliability; contractor
• ISBN/ISSN:
• URL: http://dx.doi.org/10.1108/JEDT-02-2020-0044
• Abstract:
  Prompt and effective responses to incompatibilities between as-designed and as-built drawings prevent cost and time overruns and material waste. This paper aims to provide an efficient framework to handle mismatches between these two models with the least negative impact on the whole project. First, 11 most frequent mismatches were identified through questionnaires. Also, the respondents were asked to determine the mismatches' roots and solutions and the impact of applying solutions on the whole project. Afterward, the process to present the optimum solution to one of these mismatches was modeled. After running the application programming interface developed in Navisworks software, decision-makers access a form, showing mismatches, their causes and solutions, as well as the solutions' effect. To finalize the optimal solution, a platform was provided on whether to accept the system solution or to propose an alternative. To empirically validate the reliability of the proposed framework, two projects were investigated. Two different approaches to dealing with the same mismatch occurred in these projects were compared in terms of time, cost and material required. The results showed that addressing the mismatches through the proposed framework can efficiently enhance time, cost and material consumption, in comparison with the traditional approach. There is currently no building information modeling-based holistic framework for managing mismatches between as-designed and as-built drawings. The results of this research can help contractors to make the best decision, saving project resources, when setting about a mismatch during construction.

Johnson, A, Rotimi, J O B and Wilkinson, S (2021) An evaluation of risk factors impacting project budget performance in New Zealand. Journal of Engineering, Design and Technology, 19(1), 41-61.

Mahdizadeh, H and Nor Mariah, A (2021) Numerical study of heat transfer in 90° bend tube by AI₂O₃ nano fluids using fluid injection. Journal of Engineering, Design and Technology, 19(1), 127-48.

Moeti, M, Jacques, E, Feng, W and North, C (2021) Modelling the effect of computation sampling on insight error in computational fluid dynamics scientific simulation. Journal of Engineering, Design and Technology, 19(1), 263-90.

Naga Vamsi Krishna, J, Kota, S and Venkataraman, P B (2021) An impact of simulation labs on engineering students' academic performance: a critical Investigation. Journal of Engineering, Design and Technology, 19(1), 103-26.

Prachi Vinod, I, Gangadhar, M and Deepak, M D (2021) Identifying the performance areas affecting the project performance for Indian construction projects. Journal of Engineering, Design and Technology, 19(1), 1-20.

Radebe, T B, Huan, Z and Baloyi, J (2021) Simulation of eutectic plates in medium refrigerated transport. Journal of Engineering, Design and Technology, 19(1), 62-80.

Sharma, R (2021) Effect of wastes and admixtures on compressive strength of concrete. Journal of Engineering, Design and Technology, 19(1), 219-44.

Sun, Q, He, L, Ding, F, Chen, X, Ding, L and Tu, Y (2021) Modeling and analysis of structure parameters on the lifting force for power catwalk. Journal of Engineering, Design and Technology, 19(1), 187-202.

Wang, Y, Lin, M, Xu, K, Zhang, S and Ma, H (2021) Energy consumption analysis of glass house using electrochromic window in the subtropical region. Journal of Engineering, Design and Technology, 19(1), 203-18.

Zaheer, M I, Ajayi, S O, Sambo Lyson, Z, Oyegoke, A and Kazemi, H (2021) Understanding the key competencies of market-ready building surveying graduates from employers' perspectives. Journal of Engineering, Design and Technology, 19(1), 291-314.